| |||||||||||||||||||||
| |||||||||||||||||||||||||||
Max. distance: Color: Cat.5 2230ft (680 Meter), Monochrome: Cat.5 2550ft (780 Meter)
Max. distance:
Active Balun:1.7Km using Cat.2 or 3 , 2.5Km using Cat.5 or better
Receiver Panel: 1Km using with ATP Passive Balun, 1.8Km using with ATP Active trasmitter
Active Balun:1.7Km using Cat.2 or 3 , 2.5Km using Cat.5 or better
Receiver Panel: 1Km using with ATP Passive Balun, 1.8Km using with ATP Active trasmitter
Download PDF Datasheets
Best View Display Resolution: 1024 x 768
Copyright © 2007 Auviss Techhnology Co., Ltd. All Rights Reserved.
Copyright © 2007 Auviss Techhnology Co., Ltd. All Rights Reserved.
AudioVisual security Solution
Cabling System
Passive BALUN
ATP-1111670 Screw Type
BNC Male to RJ45 Jack
BNC Male to RJ45 Jack
ATP-1131661 Tooless Type
BNC Female to IDC
BNC Female to IDC
ATP-1121670 Standard RJ45 Type
For Outdoor
BNC Male toRJ45 Jack
For Outdoor
BNC Male toRJ45 Jack
ATP-1151670 Mini Standard RJ45
For Indoor
BNC Male to RJ45 Jack
For Indoor
BNC Male to RJ45 Jack
ATP-11819610 Power Thru Balun
BNC Male + Fly lead
Video + Power
BNC Male + Fly lead
Video + Power
ATP-11811610 Power Thru Balun
BNC Male + Power Plug +Fly lead
Video + Power + Data
BNC Male + Power Plug +Fly lead
Video + Power + Data
ATP-11811630 Power Thru Balun
BNC Male + Fly lead
Video + Power + Data
BNC Male + Fly lead
Video + Power + Data
ATP-1172414
4 Ports Transceiver Box
4 BNC to 1 RJ45
4 Ports Transceiver Box
4 BNC to 1 RJ45
Active BALUN
ATP-121111 Active Balun
One port transmitter
One port transmitter
ATP-121121 Active Balun
One port receiver
One port receiver
ATP-121112 Active Balun
Two port transmitter (+Aduio)
Two port transmitter (+Aduio)
ATP-121132 Active Balun
Two port receiver (+Audio)
Two port receiver (+Audio)
ATP-135808411: 8 Ports Active Receiver Panel
Two 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
ATP-135816411: 16 Ports Active Receiver Panel
Four 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
ATP-135832411: 32 Ports Active Receiver Panel
Eight 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
Two 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
ATP-135816411: 16 Ports Active Receiver Panel
Four 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
ATP-135832411: 32 Ports Active Receiver Panel
Eight 8 Pin Terminal Block for input
32 BNC Female bulkhead for output
Others
ATP-1101600 CCTV Ground Loop Isolator
improved security from troublesome ground loop distortion.
Installation of the ATP-1101600 Video Ground Loop Isolator rescues you from the
irritation of tearing apart your setup as you search for the source of irritating signal
disturbances such as those caused by loops or wiring laid too near power lines.
The product also provides for better surge protection, while convenience of
installation means the ATP-1101600 Video Ground Loop Isolator is easily added to
previously existing operations.
Installation of the ATP-1101600 Video Ground Loop Isolator rescues you from the
irritation of tearing apart your setup as you search for the source of irritating signal
disturbances such as those caused by loops or wiring laid too near power lines.
The product also provides for better surge protection, while convenience of
installation means the ATP-1101600 Video Ground Loop Isolator is easily added to
previously existing operations.
electronic equipment due to differences in ground potential, power surges and area
lightning strikes. Easily installed between the coax video cable and equipment
conductive wire without any loss of signal quality. These products offer a combined
surge handling capacity of 3,000 watts.
Auviss offers a variety of products for your customers’ special demands, such as:
The Model ATP-1101621 and ATP-1101622 that rely upon BNC connectors to allow
for direct connection with coax CCTV video surveillance setups.
The Model ATP-1101623 and ATP-1101624 “F Series” connectors for direct
connection with SATV, VSAT, CATV and direct TV equipment.
The Model ATP-1101625 incorporates RJ45 Female Connectors for use with CCTV
and CATV equipment.
lightning strikes. Easily installed between the coax video cable and equipment
conductive wire without any loss of signal quality. These products offer a combined
surge handling capacity of 3,000 watts.
Auviss offers a variety of products for your customers’ special demands, such as:
The Model ATP-1101621 and ATP-1101622 that rely upon BNC connectors to allow
for direct connection with coax CCTV video surveillance setups.
The Model ATP-1101623 and ATP-1101624 “F Series” connectors for direct
connection with SATV, VSAT, CATV and direct TV equipment.
The Model ATP-1101625 incorporates RJ45 Female Connectors for use with CCTV
and CATV equipment.
ATP-11016xx Series CCTV Surge Protector
